BeamsWork LED Aquarium Light Timer Instructions

I recently purchased this light with a timer and was thrilled to find there were no instructions on how to set the timer.  Naturally I did what most people would do...
I went to Google!  I found these instructions, which I followed to the T, and set my timer easily.  So here's a copy & paste job of the instructions.

Timer:

Simple Time Setting & Programming below *this product does not include a manual instruction*

1. First, attach the electrical cord of OEM digital timer unit to the access port on the side of LED light fixture (Timer Ready) before plugging the main power cord to the wall outlet.

2. Now, the readout of OEM digital timer unit blinks, all LED bulbs blinks once, and the manual on/off switch is overridden after the power source is engaged .

3. At any time, press & hold both "green" and "blue" buttons for a couple seconds to set a current time; enter # of hour with "green" button; enter # of minute with "blue" button; your current time now is set.

4. With your current time already set, press & hold "green" button for a couple seconds; the readout shows "ON", then enter your desired time (hour & minute) to power on all 10,000k LEDs (Reef LED fixture) or larger # of LEDs (Fresh Water Planted LED fixture) automatically; momentarily, the readout shows "OFF", then enter your desired time (hour & minute) to power off all 10,000k LEDs (Reef LED fixture) automatically , or vice versa.

5. Also with your current time already set, press & hold "blue" button for a couple seconds; the readout shows "ON", then enter your desired time (hour & minute) to power on all Actinic Blue LEDs (Reef LED fixture) or smaller # of LEDs (Fresh Water Planted LED fixture) automatically; momentarily, the readout shows "OFF", then enter your desired time (hour & minute) to power off all Actinic Blue LEDs (Reef LED fixture) automatically , or vice versa.

6. Repeat all procedures if the OEM digital timer has been reset to default (the readout blinks) or the main power source has been cut off.